| Squarenes measurement - LS 131 |
Measurement of squareness is based on two
sets of straightness measurements. The first straightness is
measured, then the laser beam is bent by an optical square
exactly by 90 degrees and the second straightness is measured.
The squareness error is calculated.
|
Squareness set LS 131
| Optical square | LS 131.1 | |
| Adjustable mount | LS 131.2 | |
| Software | LS 131.3 |
 |
Both the LS 12 and LS 10.1 lasers can be used. The LS 130
straightness set is used.